Description
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.
In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.
The Parker domnick hunter BAM breathing air purifiers consist of six purification stages mounted on a portable skid for high-capacity multiple personnel breathing air applications.
At the inlet, a water separator removes bulk water, followed immediately by a high efficiency coalescing filter to reduce oil and water content, an activated carbon filter then removes oil vapour and odours. The fourth stage of purification is an adsorption dryer that reduces the water vapour content of the compressed air (to -40°C pdp) and CO2 to below the legal permissible limits. Downstream of the adsorption dryer, a catalyst converts carbon monoxide to carbon dioxide, again, to below the legal limits. A final dust filter captures any particulates carried over from the adsorption materials.
Features:
• 6 Purification stages
• CO monitor fitted as standard
• CO and CO2 reduction to below legal permissible limits
• Air quality 3rd party independently certified, better than the European Pharmacopoeia standard
• Energy management system fitted as standard
• Modular, space saving design
• Use with any compressed air supply
Please note this product is currently only available in Europe.
Sizing & Selection:
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.
