Online Catalogue
Showing 307–315 of 347 results
-
HYDRAULIC SHIFT DIVERTER VALVE 6 PORT
Pilot Pressure: 15 Bar Minimum
50 Bar Maximum
Flow: 50 – 120 LPM
Maximum Pressure: 350 Bar
Open On Crossover -
Marzocchi Group 1 Euro
Sizes: 1.1–8.0 cc/rev
Shaft: 1.8 taper 26.3 Nm
Spigot: 25.4mm
Mount: Euro 4 bolt 71.9 x 52.4mm
Ports: ⅜’’ BSPP
-
Nitrogen Generators for Agilent 6400 & 6500 LC/MS instruments
Agilent LCMS N2 Generators PDF
The LCMS64/65 generators provide two continuous streams of high purity nitrogen from a single ‘plug & play’ unit.
-
Parker Balston High Purity & Zero Nitrogen Generators
High Purity & Zero Nitrogen Generators PDF
High Purity & Zero Nitrogen Generators 2 PDF
High Purity & Zero Nitrogen Generators 3 PDFZero Nitrogen Generators for GC Carrier Gas and Makeup Gas Applications; Producing Nitrogen on demand, up to 3,200 ml/min.
-
Parker Commercial Cast Iron Gear Motor M76
Shaft: SAE C 1 ¼” 14T Spline | SAE C 1 ¼” Parallel Keyed
SAE D 1 3/4” 13T Spline
Mount: SAE B 4 Bolt
SAE C 2 & 4 Bolt | SAE D 4 Bolt -
Parker Denison Double Vane | T67EC & T6ECM
Displacements from 132.3 cc – 269 cc (E Frame)
10.8 cc – 100.0 cc (C Frame)
Operating pressure up to 275 bar (240 Bar Continuous)
Mount: 2 Bolt SAE C (5” Spigot)
Shaft: 1-1/4” Parallel Keyed
1-1/2” Parallel Keyed
14T x 1-1/4” Spline
17T x 1-1/2” Spline -
Parker MGG Geroter Motors
Cont. Pressure: 138 Bar
Max. Cont. Output Speed: 5000 RPM
Rated To: 69 Bar Back Pressure
Shaft: 9/16” Parallel Keyed
Spigot: 45.3mm
Mount: SAE AA 2 Bolt
Ports: ¾’’ UNO Bi-Directional -
Parker P75 / P76 Series Pump
Shaft: SAE C 1 ¼” 14T Spline
SAE C 1 ¼” Parallel Keyed
SAE D 1 3/4” 13T Spline
Mount: SAE B 4 Bolt
SAE C 2 & 4 Bolt
SAE D 4 Bolt -
Transair® Drop Brackets
Maximum Working Pressure: 12.9 Bar when system is operated between -20 to 60 C
15.9 Bar when system is operated between -20 to 46.1 C