Hydraulics
Showing 145–153 of 187 results
-
B&C Group 3 SAE
Sizes: 19.05cc/rev to 61.4 cc/rev
Shaft: P20 = ⅞’’ parallel key 450 Nm
S30 = ⅞’’ 13 spline 600 Nm
Spigot: 4’’
Mount: SAE B 2 bolt
Ports: Suction 1 5/16 ’ Pressure 1 1/16’ UNO -
Denison GOLD CUP Series
Max. Displacement: 501.5 cc/rev
Max. Flow: 901 LPM
Operating Pressure: 350 Bar/5000 PSI
Side/Rear/Opposing Ports, Mount & Shaft: SAE
Flange, Straight Threaded Port Types -
Dinoil DL Monoblock Control Valve
Maximum Flow: 150 LPM
Max. Pressure: 180 Bar
Max. Tank Pressure: 50 Bar
Max. Internal Leakage: 60cc/min
Relief Valve Adjustable
Load Drop Check In Inlet
Ports: 1” BSPP
Contact HWL For Cable & Micro Switch Kits -
DYNAGEAR ROUND BORE WELD-IN HUBS
Manufactured From Mild Steel For Ease Of Welding.
-
Hydrocontrol 6 Port Electric Diverter Valves
Manual Diverter Valve 6 Port Closed On Crossover
Flow: 50-120 LPM
Maximum Pressure: 350 Bar
Draining Is Recommended On Electric Valves For Pressures Over 160 Bar -
OMT BLANK COUPLING HALVES
OMT Bell housing and coupling PDF
Aluminium Alloy For Die & Shellcasting
-
Parker CETOP 5 Solenoid Valve
Mounting: CETOP 5 NFPA D05 / DIN NG10
Max. Pressure: P. A. B 350 Bar
Max. Pressure: T Port 210 Bar
Max. Flow: 150 LPM Selected Spool Configurations Only -
Parker Commercial Cast Iron Gear Motor M51
Shaft: SAE B ⅞” 13T Spline
SAE C 1 ¼” 14T Spline | SAE C 1 ¼” Parallel Keyed
Mount: SAE B 2 & 4 Bolt | SAE C 2 & 4 Bolt
6 Bolt Round 2.625” Spigot -
Parker Denison Double Vane | T6DC & T67DC
T6DC:
Displacements from 10.8–158 cc/rev
Operating pressure up to 300 Bar
Mount: 2 Bolt SAE C (5” Spigot)
Shaft: 1-1/4” Parallel Keyed
14T x 1-1/4” SplineT67DC:
Displacements: 47.6–190.5cc (D Frame)
10.8–100.0cc (C Frame)
SAE C Parallel and spline options
SAE C 2 Bolt Mount
Operating Pressures up to 240 Bar Continuous
Double Lip Vane Technology